:::


| Name | Lin, Hsin-Chih |
|---|---|
| Diploma |   |
| 主要經歷 |   |
| Telephone No. | 02-33664532 |
| 專長 |   |
| 授課課程 |   |
| Facilities |   |
| 個人實驗室網址 |   |
| 榮譽 |   |
| 組別 | 製程組 |
|---|
Publish
- Journal Articles
- P.C. Wang, C.C. Lin, T.Y. Huang, H.C. Lin, Y.H. Lee, M.T. Yeh, J.Y. Wang, “Effects of 2 mass% Li Addition on The AZ80 Mg Alloy”, Materials Transaction, in press. (2008).
- M.C. Lin, L.S. Chang and H.C. Lin, “Gas Barrier Properties of Titanium Oxynitride Films Deposited on Polyethylene Terephthalate Substrates by Reactive Magnetron Sputtering”, Applied Surface Science, in press. (2008).
- Steven Hong, H.C. Lin, Y. Lee, T.S. Lian, L.Y. Tseng, K.M. Lin and C.Y. Huang, “The Corrosion Behaviors of Heat-Treated SAE 8620 Steels”, Materials Science and Engineering A, in press (2008).
- T.P. Wang, H.C. Lin, K.M. Lin, W.J. Wu, P.C. Lo, “Effects of Slight Re Addition on a Fe-25Mn-6Si-5Cr Shape Memory Alloy”, Journal of Computational and Theoretical Nanoscience, in press (2008).
- H.C. Lin, T.P. Wang, K.M. Lin C.Y. Chung, P.C. Wang and W.H. Ho, “The Stress Relaxation of a Fe59Mn30Si6Cr5 Shape Memory Alloy”, Journal of Alloys and Compounds, in press, (2008).
- S.L. Chen, S.F. Hsieh, H.C. Lin, M.H. Lin and J.S. Huang, “Electrical Discharge Machining of a NiAlFe Ternary Shape Memory Alloy”, Journal of Alloys and Compounds, in press, (2008).
- H.C. Lin, C.H. Yang, M.C. Lin, C.S. Lin, K.M. Lin and L.S. Chang, 2008,“Aging Effect on a Ti47.25Ni48.75V4 Shape Memory Alloy”, Journal of Alloys and Compounds, 449, 119 (2007).
- C.C. Chen, K.F. Chiu, K.M. Lin, H.C. Lin, C.R. Yang, F.M. Wang, “Improved Electrochemical Performances of Oxygen Plasma Treated LiMn2O4 thin films”, Phys. Scr., T129, 74 (2007).
- H.C. Lin, K.M. Lin, K.C. Wu, H.H. Hsiung, H.K. Tsai, “Cyclic Hydrogen Absorption-Desorption Characteristics of TiCrV and Ti0.8Cr1.2V Alloys”, International Journal of Hydrogen Energy, 32, 4966 (2007).
- H.C. Lin, K. M. Lin, C.W. Sung and K.C. Wu, “Characteristics of Activation and Anti-poisoning in an LmNi4.8Al0.2 Hydrogen Storage Alloy”, International Journal of Hydrogen Energy, 32, 2494 (2007).
- K.F. Chiu, K.M. Lin, H.C. Lin, W.Y. Chen and D.T. Shieh, “Structural Evolution and Electrochemical Performance of Sputter-Deposited Cu6Sn5 Thin-Film Anodes”, Journal of The Electrochemical Society, 154, A433 (2007).
- C.K. Lin, C.K. Wang, P.Y. Lee, H.C. Lin and K.M. Lin, “The Effect of Ti Addition on the Hydrogen Absorption Properties of Mechanically Alloyed Mg2Ni Powders”, Materials Science and Engineering A, 449-451, 1102 (2007).
- S.L. Chen, S.F. Hsieh, H.C. Lin, M.H. Lin and J.S. Huang, “Electrical discharge machining of TiNiCr and TiNiZr ternary shape memory alloys”, Materials Science and Engineering A, 445-446, 486 (2007).
- Steven Hong, H.C. Lin, C.H. Yang, L.Y. Tseng and K.M. Lin, “Effects of Heat Treatment and Composition Modification on SAE 8620 Steels”, Materials Science Forum, 539-543, 4452 (2007).
- Y.C. Chuang, S.C. Lee and H.C. Lin, “Effect of Temperature on the Sliding Wear Behavior of Laser Surface Alloyed Ni-base on Al-Mg-Si Alloy”, Applied Surface Science, 253, 1404 (2006).
- K.F. Chiu, H.C. Lin, K.M. Lin and C.C. Chen, “Stability improvement of LiMn2O4 thin film cathodes under high rate and over-discharge cycling”, Journal of The Electrochemical Society, 153 (10), A1992 (2006).
- M.C. Lin, L.C. Chang, H.C. Lin, C.H. Yang and K.M. Lin, “A study of high-speed slurry erosion of NiCrBSi thermal-sprayed coating”, Surface and Coatings Technology, 201, 3193 (2006).
- Y.C. Chuang, S.C. Lee and H.C. Lin, “Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder”, Mater. Trans., 47, 1140 (2006).
- H.C. Lin, K.M. Lin, S.K. Wu, T.P. Wang and Y.C. Hsiao, “ Effects of Thermo-Mechanical Training on a Fe59Mn30Si6Cr5 Shape Memory Alloy”, Materials Science and Engineering A, 438-440, 791 (2006).
- S.K. Wu, H.C. Lin and T.Y. Lin, “ Electrical Resistivity of TiNi Binary and TiNiX (X=Fe, Cu) Ternary Shape Memory Alloys”, Materials Science and Engineering A, 438-440, 536 (2006).
- K.F. Chiu, H.C. Lin, K.M. Lin T.Y. Lin and D.T. Shieh, “ The Significant Role of Solid Oxide Interphase in Enhancement of Cycling Performance of Sn Thin-Film Anodes”, Journal of The Electrochemical Society, 153 (6), A1038 (2006).
- K.F. Chiu, H.C. Lin, K.M. Lin T.Y. Lin and D.T. Shieh, “ Anode-Shielded, Sputter- Deposited Nanocrystalline Sn Thin-Ffilm Anodes for Lithium-Ion Batteries”, Journal of The Electrochemical Society, 153 (5), A920 (2006).
- S.K. Wu, H.C. Lin and T.S. Chou, “A study on the low temperature internal friction relaxation peak in a Ti49.8Ni50.2 alloy”, Mater. Trans., 47, 3, 711 (2006).
- Y.C. Chuang, S.C. Lee and H.C. Lin, “Microstructure and Characteristic of Laser Surface Alloyed Ni and Ni-Cr-B-Si on Al-Mg-Si Alloy”, Mater. Trans., 47, 106 (2006).
- C. S. Lin, H.C. Lin, K. M. Lin and W. C. Lai, “Formation and Properties of Stannate Conversion Coatings on Magnesium Alloys”, Corrosion Science, 48, 93 (2006).
- C.K. Lin, C.K. Wang, H.C. Lin and P.Y. Lee, “Structure and Hydrogen Absorption Property of Mg2Ni-Ti Alloy Powders Prepared by Mechanical Alloying”, Journal of Metastable and Nanocrystalline Materials, 24-25, 419 (2005).
- C.K. Lin, C.K. Wang, H.C. Lin and P.Y. Lee, “Structure and Hydrogen Absorption Property of Mg2Ni-Ti Alloy Powders Prepared by Mechanical Alloying”, Journal of Metastable and Nanocrystalline Materials, 24-25, 419 (2005).
- K.F. Chiu, H.C. Lin, K.M. Lin and C.H. Tsai, “ Modification of sputter-deposited nanocrystalline LixMn2-yO4 thin-film cathodes by in situ substrate bias and postanneal”, Journal of The Electrochemical Society, 152 (10), A2058 (2005).
- H.C. Lin, C. H. Yang, K. M. Lin and G. K. Hsu, “A study of Ti50-x/2Ni40-x/2Cu10Crx ( X= 0~1at%) shape memory alloys”, Journal of Alloys and Compounds, 386, 157 (2005).
- H.C. Lin, K.M. Lin, Y.S. Chen and C.L. Chu, “The Wire Electro-Discharge Machining Characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr Shape Memory Alloys”, Journal of Materials Processing Technology, 161, 435 (2005).
- H.C. Lin, K.M. Lin, Y.S. Chen and C.H. Yang, “Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloy II, Erosion characteristics”, Surface and Coatings Technology, 194, 74 (2005).
- H.C. Lin, K.M. Lin and Y.S. Chen, “Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloy I, Nitriding parameters and microstructure characterization”, Surface and Coatings Technology, 194, 68 (2005).
- S.F. Hsieh, S.K. Wu, H.C. Lin and C.H. Yang, “Transformation Sequence and Second Phases in Ternary Ti-Ni-W Shape Memory Alloys with Less Than 2 at% W”, Journal of Alloys and Compounds, 387, 121 (2005).
-
- Symposium Papers & Conference Proceedings
- P.C. Wang, C.C. Lin, T.Y. Huang, H.C. Lin, Y.H. Lee, M.T. Yeh, J.Y. Wang, “Effects of 2 mass% Li Addition on The AZ80 Mg Alloy”, ASMA2, October 1~3, Fukuoka, Japan (2008).
- T.P. Wang, H.C. Lin, K.M. Lin, W.J. Wu, P.C. Lo and F.H. Chen, “Effects of Slight Re Addition on a Fe-25Mn-6Si-5Cr Shape Memory Alloy”, ICPNS-2007, October 23~27, Zhengzhou, China. M124 (2007).
- Steven Hong, H.C. Lin, Y. Lee, T.S. Lian, L.Y. Tseng and K.M. Lin, “The Corrosion Behaviors of Heat-Treated SAE 8620 Steels”, ICPNS-2007, October 23~27, Zhengzhou, China. M120 (2007).
- C.C. Chen, K.F. Chiu, K.M. Lin and H.C. Lin, “Electrochemical Properties of LiMn2O4 Thin Films Treated by Oxygen Plasma Irradiation”, ISFM-2007, May 16~19, Hangzhou, China. Conf-30 (2007).
- H.C. Lin, K.M. Lin, T.P. Wang, C.Y. Chung and F.H. Chen, “The Stress Relaxation of a Fe59Mn30Si6Cr5 Shape Memory Alloy”, ISFM-2007, May 16~19, Hangzhou, China. Conf-163 (2007).
- Steven Hong, H.C. Lin, C.H. Yang, L.Y. Tseng and K.M. Lin, , "Effects of Heat Treatment and Composition Modification on SAE 8620 Steels", THERMEC-2006, July 04~08, Vancouver, Canada (2006).
- C.K. Lin, C.K. Wang, P.Y. Lee, H.C. Lin and K.M. Lin, " The Effect of Ti Additions on the Hydrogen Absorption Properties of Mechanically Alloyed Mg2Ni Powder", The 12th International Conference on Rapidly Quenched & Metastable Materials (RQ12), August 21-26, Jeju, Korea (2005).
- H.C. Lin, C. H. Yang, M.C. Lin, C.S. Lin and K. M. Lin, "The Aging Effect on a Ti47.25Ni48.75V4 Shape Memory Alloy", ISFM 2005, December 06~08, Kuala Lumpur, Malaysia (2005).
- H.C. Lin, K.M. Lin, S.K. Wu, T.P. Wang, Y.C. Hsiao and F.H. Chen, " Effects of Thermo-Mechanical Training on a Fe59Mn30Si6Cr5 Shape Memory Alloy", ICOMAT-05, June 14~17, Shanghai, China (2005).
- S.K. Wu, H.C. Lin and T.Y. Lin, " Electrical Resistivity of TiNi Binary and TiNiX (X=Fe, Cu) Ternary Shape Memory Alloys", ICOMAT-05, June 14~17, Shanghai, China (2005).
- M.C. Lin, L.C. Chang and H.C. Lin, “A Study of Flexible Substrate with High Resistance of Gas Permeation”, The 2007 Symposium on Energy and Optical-Electro Thin Films’ Technology, No.9-25, Taipei, Taiwan (2007).
- M.C. Lin, L.C. Chang and H.C. Lin, “Gas Barrier Properties of Titanium Oxynitride Films Deposited on Polyethylene Terephthalate Substrates by Reactive Magnetron Sputtering”, The 2007 Symposium on Energy and Optical-Electro Thin Films’ Technology, No.1-6, Taipei, Taiwan (2007).
- Y.C. Lo, P.C. Wang, H.C. Lin, K.M. Lin and M.T. Yeh, “A Study of LZ101-0.3%Mn Magnesium-Lithium Alloy”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P08-057, November 16-17, Hsinchu, Taiwan (2007).
- W.J. Wu, T.P. Wang, H.C. Lin and K.M. Lin, “Effects of Slight Addition of C and N on the Fe-30Mn-6Si-5Cr Shape Memory Alloy.”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P08-055, November 16-17, Hsinchu, Taiwan (2007).
- C.H. Yang, K.M. Lin and H.C. Lin, “The Study of High-performance Fe-Mn-Si based Shape Memory Alloys Improved by Precipitating MC Carbide”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P08-052, November 16-17, Hsinchu, Taiwan (2007).
- S.Y Lin, K.M. Lin, H.C. Lin and H.M. Lin, “A Study on The Characteristics and Anti-poison of TiCrV Hydrogen Storage Alloys”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P01-068, November 16-17, Hsinchu, Taiwan (2007).
- C.C. Lo, K.F. Chiu, K.M. Lin and H.C. Lin, “The Study of Solid-State Electrolyte (LiPON) for All Solid-State Lithium Ion Thin Film Battery”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P01-125, November 16-17, .Hsinchu, Taiwan (2007).
- C.C. Chen, K.F. Chiu, K.M. Lin and H.C. Lin, “A Study on the Preparation and Surface Modification of Lithium Manganese Oxide Cathode Thin Films by RF Magnetic Sputtering Method”, The 2007 Annual Conf. of the Chinese Society for Materials Science, P01-124 , November 16-17, Hsinchu, Taiwan (2007).
- Steven Hong, Y. Lee, T.S. Lian, L.Y. Tseng, H.C. Lin and K.M. Lin, “The stress corrosion behaviors of SAE 8620 alloy steel”, Proc. of The 2007 Annual Conf. of The Taiwan Society for Metal Heat Treatment, Taipei, Taiwan, O1-4 (2007).
- Y.C. Lo, P.C. Wang, H.C. Lin, K.M. Lin and M.T. Yeh, “A study of precipitation hardening of LZ101-0.3%Mn magnesium-lithium alloy”, The 2007 Annual Conf. of The Taiwan Society for Metal Heat Treatment, Taipei, Taiwan, 3-9 (2007).
- Steven Hong, T.S. Lian, L.Y. Tseng, H.C. Lin and K.M. Lin, “Effects of heat treatment on SAE 8620 alloy steel”, Proc. of The 2006 Annual Conf. of The Taiwan Society for Metal Heat Treatment, Tainan, Taiwan, 26-31 (2006).
- C.H. Yang, K.M. Lin and H.C. Lin, “Effects of Alloy Elements on the Grain-Boundary Phase in Fe-Mn-Si-Cr Shape Memory Alloys”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-099, Tainan, Taiwan (2006).
- Y.F. Lung, H.C. Lin and K.M. Lin, “The Stamping Behavior of an Early-Aged 6061 Aluminum Alloy”, The 2006 Annual Conf. of The Taiwan Society for Metal Heat Treatment, Tainan, Taiwan, 3-9 (2006).
- T.P. Wang, B.C. Lo, H.C. Lin, K.M. Lin and W.C. Li, “Effect of R.E. Addition on the FeMnSi(Cr) Shape Memory Alloys”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P08-100, Tainan, Taiwan (2006).
- W.Y. Chen, K.M. Lin, K.F. Chiu and H.C. Lin, “The Electrochemical Properties of Bias Co-sputtered Cu6Sn5 Thin Film Anodes”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-091, Tainan, Taiwan (2006).
- C.H. Hsu, K.F. Chiu, K.M. Lin and H.C. Lin, “A Study on the Electrochemical Properties for Silicon Thin Film with Copper/Tin Surface Coating”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-100, Tainan, Taiwan (2006).
- C.C. Chiu, H.C. Lin, K.M. Lin and S.I. Lin, “Effects on the Characteristics of Activation and Absorption/Desorption by Adding Mo to TiCr Hydrogen Storage Alloys”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-090, Tainan, Taiwan (2006).
- K.C. Wu, K.M. Lin, H.C. Lin, S.I. Lin and J.Y. Wang, “A Study on the Characteristics and Structures of TiCrV Hydrogen Storage Alloys”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-089, Tainan, Taiwan (2006).
- C.C. Chen, K.F. Chiu, K.M. Lin and H.C. Lin, “A Study on the Preparation and Surface Modification of Lithium Manganese Oxide Cathode Thin Films by RF Magnetic Sputtering Method”, The 2006 Annual Conf. of the Chinese Society for Materials Science, P01-094, Tainan, Taiwan (2006).
- C.K. Lin, C.Y. Chen, P.Y. Lee and H.C. Lin, “Modification of the Mechanically Alloyed Mg2Ni Hydrogen Storage Alloy Powder”, Taiwan-Chinese Meeting & Workshops for Nano-Materials, April 25, Taipei, Taiwan (2006).
- M.C. Lin, L.C. Chang, H.F. Yuan and H.C. Lin, “Effects of Nitrogen Flow on the Titanium Nitride Films Deposited on PET Substrates by RF Reactive Magnetron Sputtering”, The 2006 Symposium on Energy and Optical-Electro Thin Films’ Technology, Nan-Tou, Taiwan (2006).
- W. Y. Chen, K. M. Lin, K.F. Chiu and H. C. Lin, “A study on the Electrochemical Properties of Co-Sputtered Cu/Sn Thin Film Anodes with In-Situ Bias and Copper Surface Coating”, The 2006 Symposium on Energy and Optical-Electro Thin Films’ Technology, A33, Nan-Tou, Taiwan (2006).
- C.C. Lo, K.M. Lin, K.F. Chiu, H.C. Lin and Y.C. Chung, “A Study on All Solid Stated Lithium Ion Battery(n-LiMn2O4/LiPON/Sn) Prepared by RF Reactive Magnetron Sputtering at Low Temperature” The 2006 Symposium on Energy and Optical-Electro Thin Films’ Technology, A10, Nan-Tou, Taiwan (2006).
- W.Y. Chen, K.F. Chiu, K.M. Lin and H.C. Lin, “The Electrochemical Performance of Cu6Sn5 Thin Films Deposited by Bias Magnetron Sputtering”, The 2005 Annual Conf. of the Chinese Society for vacuum technology, Huwei, Yunlin, Taiwan (2005).
- T.P. Wang, K.M. Lin, H.C. Lin and C.S. Lin, “A Study on the Shape Memory Mechanism of Fe-Mn-Si-Cr-Re Alloys”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 1-1-O-006 (2005).
- C.H. Hsu, H.C. Lin, K-F. Chiu and K.M. Lin, “The Electrochemical Performance of Si1-xSnx Thin Films Deposited by Magnetron Sputtering”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 3-1-P-017 (2005).
- C.C. Chen, H.C. Lin, K-F. Chiu, K.M. Lin and Y.C. Chu, “A Study on the Surface Modified LiMn2O4 Cathode Material Prepared by Sol-gel Method”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 3-1-P-014 (2005).
- T.Y. Lin, H.C. Lin, K-F. Chiu and K.M. Lin, “The Electrochemical Performance Forward Lithium of Sn Thin Films Deposited by Anode Shielded Sputtering”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 3-1-P-013 (2005).
- K.C. Wu, C.C. Chiu, K.M. Lin and H.C. Lin, “A Study on the Characteristics of Hydrogen Absorption/desorption of TiCr-based Hydrogen Storage Alloys”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 3-1-P-010 (2005).
- C.Y. Chang, H.C. Lin, K.M. Lin and T.P. Wang, “The Stress Relaxation of a Fe59Mn30Si6Cr5 Shape Memory Alloy”, The 2005 Annual Conf. of the Chinese Society for Materials Science, 1-1-P-011 (2005).
- C.K. Lin, C.K. Wang, P.Y. Lee, H.C. Lin and K.M. Lin, “ The Effect of Ti Additions on the Hydrogen Absorption Properties of Mechanically Alloyed Mg2Ni Powder”, Eleventh Users’ Meeting & Workshops, October 25-26, Hsinchu, Taiwan (2005).
- C.K. Lin, C.K. Wang, P.Y. Lee, H.C. Lin and K.M. Lin, “ The Preparation and Characteristic of Mg2Ni-Ti Hydrogen Storage Alloy Powders”, Taiwan-China Powder Metallurgy Symposium, August 26~27, Nan-Tou, Taiwan (2005).
-













