:::
| 姓名 | 黃坤祥 |
|---|---|
| 學歷 | 美國壬色列理工學院博士 1981.01 - 1984.05 美國壬色列理工學院碩士 1977.09 - 1978.12 台灣大學學士 1971.09 - 1975.06 |
| 主要經歷 | Packaging Manager, General Instrument, Long Island, N.Y. 1984-1988 President, P/M Assoc. R.O.C. (Taiwan) 2003-2007 |
| 聯絡電話 | 02-33661313 |
| 專長 | 燒結理論、粉末冶金 |
| 授課課程 | 燒結理論、粉末冶金學、材料科學導論 ( 金屬 ) |
| 實驗室 | 粉末冶金實驗室 ( 工綜館346, 志鴻館215) |
| 個人實驗室網址 | http://www.mse.ntu.edu.tw/~pmlab |
| 榮譽 | 97學年台灣大學大學教學優兩獎 2006年侯金堆傑出榮譽獎-金屬冶煉類 92學年台灣大學教學傑出獎 90學年台灣大學教學優良獎 Editional Review Committee, P/M Science & Technology Briefs,published by Metal Powder Industry Federation, USA,1998,1999 美國粉末冶金學會MPIF 所出版之P/M Sci. & Tech. Briefs 之 Editorial Review 之 CommitteeMember,1999 |
| 組別 | 製程組 |
|---|
個人著作
- 期刊論文
- Y.L. Fan, K.S. Hwang, and S. Su, “Improvement of the Dimensional Stability of Powder Injection Molded Compacts by Adding Swelling Inhibitor into the Debinding Solvent”, accepted, Metallurgical and Materials Transaction A, (2007)
- M. W. Wu, K. S. Hwang, and H. S. Huang, “In-Situ Observations on the Fracture Mechanism of Diffusion Alloyed Ni-Containing PM Steels and a Proposed Method for Tensile Strength Improvement”, Metallurgical and Materials Transaction A, 38A, 1598-1607 (2007)
- M. W. Wu, K. S. Hwang, and K. H. Chuang, “Improved Distribution of Nickel and Carbon in Sintered Steels through the Addition of Chromium and Molybdenum”, Powder Metallurgy, in press. (2007)
- Y.L. Fan and K.S. Hwang, “Properties of Metal Injection Molded Products using Titanate-containing Binders”, Materials Transactions, JIM, 48, 544-549. (2007)
- K. S. Hwang and Y. W. Hsueh, “Post-Sintering Thermal Treatment of Nitrogen-Containing Pressed-and-sintered and PIM Stainless Steels”, Powder Metallurgy, 50, 165-171 (2007)
- K. S. Hwang and Y. W. Hsueh, "Post-Sintering Thermal Treatment of Nitrogen-Containing Pressed-and-sintered and PIM Stainless Steels," Powder Metallurgy, accepted (2006)
- M. W. Wu and K. S. Hwang, "Improved Homogenization of Ni in Sintered steels Through the Use of Cr-Containing Prealloyed Powders," Metallurgical and Materials Transaction A, 37A, 3577-3585 (2006)
- M. W Wu, K. S. Hwang, H. S. Huang, and K. S. Narasimhan, "Improvements in Microstructure Homogenization and Mechanical Properties of Diffusion Alloyed Steel Compact by the Addition of Cr-containing Powders," Metallurgical and Materials Transaction A, 37A, 8, 2559-2568 (2006)
- J. Shu, K. S. Hwang, Y. T. Pan, "Improvements in Sintered Density and Dimensioal Stability of Powder Injection Molded 316L Compacts Through Adjusting Alloying Compositions," Acta Materialia, 54, 5, 1335-1342 (2006)
- K. S. Hwang and C. C. Hsieh, "Injection-Molded Alumina Prepared with Mg-Containing Binders," J. Am. Ceram. Soc., 88, 9, 2349-2353 (2005)
- K. S. Hwang, T. H. Yang, and S. C. Hu, "Diamond Cutting Tools with a Ni3Al Matrix Processed by Reaction Pseudo-Hipping," Metallurgical and Materials Transaction A, 36A, 10, 2801-2806 (2005)
- K. S. Hwang and G-J Shu, "Solvent Debinding Behavior of PIM Components Prepared from Powders with Different Particle Sizes," Metallurgical and Materials Transaction A, 36A, 161-167 (2005)
- Guo-Jiun Shu and Kuen-Shyang Hwang, "Effect of Heating Rate and Phase Transformation on the on the Dimensional Control of Ferrous PIM Compacts," Materials Transactions, JIM, 46, 2, 298-302 (2005)
-
- 研討會論文
- 吳明偉、黃坤祥，”粉末冶金鋼中合金元素之均質化與顯微組織的改良”， 粉末冶金會刊，2007, 32卷4期，in press.
- 黃坤祥、吳明偉、蔡嘉正，”High Strength Sinter-Hardening Powder Metallurgy Alloys”， 2007第三屆海峽兩岸工程材料研討會。
- 吳明偉、黃坤祥，”粉末冶金鋼中合金元素之均質化與顯微組織的改良”, 2007海峽兩岸粉末冶金研討會論文集。
- 黃坤祥、鄭禮輝，"金屬粉末射出成形回收料劣化之研究"，粉末冶金會刊，31卷4期，212-221 (2006)
- 莊凱翔、黃坤祥，"Cu對射出成形不銹鋼切削性之影響"，粉末冶金會刊，31卷3期，162-167 (2006)
- 黃坤祥、陳柏源，"超薄型散熱銅鰭片之射出成形製程研究"，工程科技通訊，85期，31-34 (2006)
- B.Y. Chen, K.S. Hwang and C. C. Wang, "Thermal Dissipation Performance of Heat Sink /Vapor Chamber Prepared by Metal Injection Molding Process ," 中國材料科學學會2005年年會論文集 (2005)
- 吳明偉、黃坤祥、黃宏勝，"Fe-4Ni-0.5Mo-1.5Cu 擴散型合金鋼之機械性質、顯微破壞機制與強化方法"，2005海峽兩岸粉末冶金學術研討會論文集，48-56 (2005)
- 譯著
- 黃坤祥，"粉末冶金學"第二版，中華民國粉末冶金協會，2003年9月出版(2003)
